TSKgel^® GMH_HR-L HPLC Column

32110501

TSKgel GMH_HR-L mixed bed columns are packed with rigid, multiple pore size, polymer beads. Mixed bed columns are commonly used for unknown samples and for the analysis of polymers with a broad molecular weight distribution. TSKgel GMH_HR-L columns are shipped in THF, which can be exchanged for a wide variety of organic solvents.
The TSKgel H_HR column line consists of eight columns with different pore sizes, TSKgel G1000H_HR through TSKgel G7000H_HR, and five columns with an extended linear range of the calibration curve. All TSKgel H_HR-type columns are shipped in THF, which can be exchanged for a much broader range of organic solvents than TSKgel H_XL columns, although Hxl columns are more inert. The maximum operating temperature for most TSKgel H_HR-type columns is 140℃, except for GMH_HR columns, which can only be used up to 80℃. TSKgel H_HR-type columns are conventional GPC columns with dimensions of 7.8mm ID x 30cm.

Shipped in THF.

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

TSKgel is a registered trademark of Tosoh Corporation

stainless steel

suitable for USP L21

TSKgel^®

Tosoh 17362

0.5-1.0 mL/min standard flow rate
50 bar max. pressure
80 ℃ temperature

HPLC: suitable

30 cm × 7.8 mm

polymer particle platform

polystyrene-divinylbenzene phase

5 μm

mixed

size exclusion (SEC)

THF can be replaced with acetone, ethanol, quinoline, benzene, o-dichlorobenzene, ethyl acetate, dodecane, FC-113, carbon tetrachloride, dichloromethane, dichloroethane, trichloroethane, n-hexane, cyclohexane, xylene, tetrahydrofuran, chloroform, 1,4-dioxane, hexafluoroisopropanol, toluene, 1-chloronaphthalene, dimethylaceto acetamide, methyl ethyl ketone, trichlorobenzene, m-cresol, dimethylformamide, methylpyrrolidone, o-chlorophenol/chloroform, dimethyl sulfoxide, pyridine