广州伟伯科技有限公司
您的位置:首页 > 产品中心 > Millipak® 40 Gamma Gold精滤器
产品搜索:

Millipak® 40 Gamma Gold精滤器

Millipak® Gold Filter
产品编号:4080221
规格:Sterile 0.22 μm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Alpha-Q, Milli-DI® and Milli-Q® Academic / Biocel / Element / Synthesis / Plus / Gradient systems
包装规格:2 EA
产品类别:进口试剂
品牌:Milli-Q
优惠价:立即咨询
产品价格
产品编号包装单位单价(元)国内现货国外库存询价单
40802212 EA3930
产品别名

Millipak® 40 Gamma Gold精滤器

Millipak® Gold Filter

Millipak 40 Gamma Gold Filter

Millipak Gold过滤器

基本信息
eCl@ss
33050190
NACRES
JA.14
General description【一般描述】
Millipak® 膜产品设计用于实验室的常规过滤应用。经证明,Millipak® 过滤器是同类产品中的佼佼者,用于净水系统,提供不含颗粒物和细菌的水,满足科研应用的严格要求。
Application【应用】
提供不含细菌和颗粒物的水,适合实验室中细菌控制至关重要的技术(如细胞培养、微生物培养基制备等)。
Features and Benefits【特点和优势】
  • Millipak® 膜过滤器由 Durapore® PVDF 膜制成,具有高流速和高通量、溶出物少、化学相容性广的特点。
  • 伽马射线辐照可进一步控制细菌。
  • 膜由带有通道的硬质塑料盘支撑,该通道可确保高水流量和耐压力变化性能,而不会引起膜破裂的风险
  • Millipak®膜过滤器采用独特的、简洁的堆叠盘式设计,可最大程度减少滞留体积和颗粒脱落。
  • 连接到分配水点的出口,如Milli-Q® 净水系统的POD。保护罩可防止水分配过程中空气中细菌污染物的侵入。
  • 保护罩可防止分配过程中空气中细菌的侵入。
  • 轻松的维护:该过滤器可轻松过滤和更换。
  • 设备配置:伽玛金胶囊
  • 无菌单位。
  • 密封交付,并附有质量证明书
Other Notes【其他说明】
这些产品是在符合 FDA 良好生产规范的工厂内生产的。
Directions for Use

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes and is a device that meets requirements under FIFRA. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Preparation Note【制备说明】
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note【分析说明】
细菌保留
使用 ASTM® F838 方法,对样品进行最小保留的缺陷短波单孢菌挑战浓度为 1 x 10⁷ CFU/cm² 的定量保留。
重量萃取物:200 mL 冲洗后在室温下于水中 24 小时使用灭菌装置
Legal Information【法律信息】
ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLI-DI is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
产品性质
material【物料】
PVDF membrane
Quality Level【质量水平】
400
sterility【无菌性】
sterile
product line【产品线】
EMPROVE® Filter
feature【特点】
hydrophilic
packaging【包装】
pkg of 2 units
manufacturer/tradename
Millipak®
parameter【参数】
0.35 bar max. differential pressure at 123 ℃ (Forward)
0.7 bar max. differential pressure at 25 ℃ (Reverse)
1.7 bar max. differential pressure at 80 ℃ (Forward)
4.1 bar max. differential pressure at 25 ℃ (Forward)
5.2 bar max. inlet pressure at 25 ℃
inlet connection diam.
1/4  in.
outlet connection diam.
1/4 in.
impurities【杂质】
<0.5  EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤1.5 mg/device
matrix【基质】
Durapore®
pore size【孔径】
0.22 μm pore size
fitting【配件】
male NPT inlet connection
outlet stepped hose barb (with bell)
compatibility【相容性】
for use with Alpha-Q
for use with Milli-DI®
for use with Milli-Q® Academic
for use with Milli-Q® Biocel
for use with Milli-Q® Direct
for use with Milli-Q® Element
for use with Milli-Q® Gradient
for use with Milli-Q® Plus
for use with Milli-Q® Reference
for use with Milli-Q® Synthesis
shipped in【运输】
ambient
广州伟伯科技有限公司 版权所有 CopyRight ©2006-2024, All Rights Reserved
工信部备案号:粤ICP备08114744号   Page Run Time: 0.0090