您的位置：首页 > 产品中心 > Optiscale
Optiscale
Optiscale® Capsule Filter Polygard® CN
产品别名
Optiscale
Optiscale® Capsule Filter Polygard® CN
Optiscale Capsule Polygard -CN 10 μm 3/4 in. TC-1/4 in. HB
基本信息
| eCl@ss | 32031610 |
| General description【一般描述】 | Device Configuration: 取样皿滤膜 |
| Features and Benefits【特点和优势】 | Format: Single Layer |
| Other Notes【其他说明】 | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Directions for Use:
|
| Preparation Note【制备说明】 | Sterilization Method 3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable |
| Analysis Note【分析说明】 | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL |
| Legal Information【法律信息】 | OPTISCALE is a registered trademark of Merck KGaA, Darmstadt, Germany POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany |
产品性质
| Quality Level【质量水平】 | 400 |
| material【物料】 | PVDF vent cap fluoroelastomer FKM seal polycarbonate polypropylene polypropylene support |
| reg. compliance | meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials) |
| manufacturer/tradename | OptiScale® |
| parameter【参数】 | 25 ℃ max. inlet temp. 5.5 bar max. inlet pressure (80 psi) at 25 ℃ 80 psig max. inlet pressure |
| diam.【直径】 | 6.9 cm (2.7 in.) |
| filtration area【过滤面积】 | 17.7 cm2 |
| inlet connection diam. | 3/4 in. |
| outlet connection diam. | 1/4 in. |
| impurities【杂质】 | ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction) |
| matrix【基质】 | Polygard®-CN |
| pore size【孔径】 | 10.0 μm nominal pore size 10.0 μm pore size |
| input | sample type liquid |
| fitting【配件】 | inlet sanitary flange 19 mm ( outlet hose barb 6 mm ( |
