您的位置：首页 > 产品中心 > Ace pressure tubes with plunger valves and thermowells
Ace pressure tubes with plunger valves and thermowells
基本信息
| NACRES | NB.11 |
| General description【一般描述】 | Glass plunger valve has a 5 mm I.D. thermowell for a thermocouple wire or sheathed probe up to 1/8 in. (3.2 mm) diam. Overall length of plunger valve is 190 mm. The thermowell length is 70 mm. Plunger has a hole on the side that, when positioned in relation to the O-ring seal, allows tube to be open or closed to the atmosphere (i.e. pull to close, push to open). Complete item consists of tube with #15 Ace-Thred, PTFE bushing with FETFE® O-ring, and plunger valve with thermowell. Replacement FETFE O-rings: Ace-Thred #Front SealBack Seal 7 Z504661 Z504742 15 Z504858 Z505021 25 Z505056 Z505110 CAUTION: This glassware is not guaranteed against breakage caused by pressure or vacuum. These tubes should never be used if scratched or otherwise damaged. |
| Legal Information【法律信息】 | FETFE is a registered trademark of Ace Glass, Inc. |
产品性质
| material【物料】 | PTFE cap borosilicate glass tube cap (Front-Seal Plunger Valve) clear tube glass round bottom screw top cap (plugseal) white cap |
| sterility【无菌性】 | non-sterile |
| feature【特点】 | graduations: no internal thread |
| packaging【包装】 | pack of 1 ea |
| manufacturer/tradename | Ace Glass 8648-170 |
| L × O.D.【长度 × 外径】 | 20.3 cm × 38.1 mm |
| capacity【容量】 | ~120 mL |
| diam.【直径】 | 38.1 mm |
| binding type | non-treated surface |
